4.0t 5.2m Quadra MOT Lift Class VII & VI (ATL & OPTL) 3ph

Product Number: SF-9057-SERIES


Product Description

The SF/9057 Class VII ATL/OPTL lift meets the dimensional requirements and technical specification set out by DVSA and incorporates a complete range of safety features to ensure operator peace of mind. The lift platforms, cross members and columns are manufactured from top grade materials to ensure longevity and performance without deflection and distortion and the lift conforms to EN 1493 and CE requirements for lifting equipment.

The SF/9057 is available for both surface mounting and recess mounting (specify when ordering).

The SF/9057 can also be equipped with rear slip plates for wheel alignment.

Installation

The Quadra SF/9057 Class VII ATL lift requires a level floor to +/- 8mm of C30 or equivalent grade concrete of a minimum thickness of 160mm excluding any screed or paving. If in doubt, a qualified person (structural engineer) should be consulted. For lifts requiring a 3ph power supply a fused circuit protection must be installed. A neutral conductor should also be provided.

SKU: SF-9057-SERIES Category:

Register with us today to gain full access

Request Datasheets

Latest Tecalemit Case Studies