Combined Blue Tooth Gas and Smoke Meter

Product Description

The Tecalemit MDS is a modular Combined Emission Tester which as standard, incorporates a blue tooth smoke head and a PC using a windows operating system, all housed in a stylish cabinet. The gasbench has no warmup time, meaning you can start work immediately. The TGD/MDS is a truly modular system and can be expanded to include vehicle diagnostic units Discope 802 and DiOBD. The smoke meter is Bluetooth Class 1 approved with a range of up to 100 metres. It is mains powered, 240v AC, with a 24v DC transformer protected to IP65. Being mains powered, the smoke meter is continuously maintained at operating temperature and does not require re-charge or replacement of expensive batteries, which over the long term can prove an expensive maintenance cost. Current UK specification requires the emission tester to have OIML Class I approval, however, the TGD/MDS Emission Tester is approved to Class 00, two classes higher than required under current DVSA legislation. With vehicle emissions reducing following the introduction of new technologies, should DVSA decide to make changes to the OIML class specification for gas analysers, the TGD/MDS is ready for them. The new design of condensate trap detects moisture using an electrical sensor; this leads to improved accuracy, a reduction in condensate problems and a reduction in pump running times.

The TGD/MDS is upgradable to measure NOx at an additional cost. The TGD/MDS is also a natural addition to the Tecalemit ATL (Automated Test Lane) as the computer can also serve the brake tester in the ATL lane. This streamlines the equipment in your workshop.