Tecalemit Garage Equipment

Sales

+44 (0) 1752 219 111 [email protected]

Servicing and Repairs

+44 (0) 1752 219 100 [email protected]
Vehicle Lifting - Jacking Beams

2.0T Hydraulic Jacking Beam

Product Number: SS-8828

Product Description

The SS/8828 is a 2.0t manual jacking beam suitable for use on the following Tecalemit lifts:-

  • SF/99440

Jacking Beams are sold on a self-install basis unless supplied with a Tecalemit Vehicle Lift.

SKU: SS-8828 Category:

Technical Specifications & Datasheets

Do You Require More Information?

Call us on +44 (0) 1752 219 111

Register with us today to gain full access

Request Datasheets

Latest Tecalemit Case Studies

We’ve Given Ourselves Some Headroom, A Class VII MOT Bay Incorporating Class ...

18 July 2022
It was the year 2000 and Matt Reid had created Onestop Motor Engineers Ltd, up in Stirling. MOT Testing had always be...
Tecalemit Class VII MOT Bay With MotorcycleW
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Two Into One, Down In Newport, An OPTL Upgrade Using A 4-Post Lift

16 June 2022
In 1996, Mark Jones and Philip Athay started their business, A J Auto Repairs in Newport.  In 2006, to cater for cust...
AJ Auto Repairs Ltd OPTL MOT SF-9259 Lift
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Automated Test Lane (ATL) Update To An Old Class IV Pit Bay

13 June 2022
It was January 2022 and Burchin Tepe decided that he wanted to create his own MOT and Service Centre.  A bold move fo...
Headlamp Beam Tester
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Tecalemit Equip The New Vehicle Test Centre On The Isle Of Man

6 May 2022
It was December 2019, and the Isle of Man Test Centre required Emissions Test equipment for Petrol and Diesel vehicle...
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Waste Not, Want Not. An ATF Specification HGV Test Bay

15 February 2022
It was 1988 when Philip and Melanie Liddell created the business of Ace Liftaway Ltd. Starting with one truck and eig...
Drive Through Configuration
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Class I & II Motorcycle Test Bays – So Good, Phil Does It Twice

25 January 2022
It was 2016 when Phil Sanders decided to create Surrey Motorcycles and provide the West Molesey area with specialist ...
Completed Tecalemit Motorcyle MOT Bay
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Raising the roof on a Class IV to VII MOT bay conversion

24 September 2021
It was back in the late 1980s that Gordon Winter at Coalville MOT Centre installed a Tecalemit DE/7200 MOT Roller Bra...
A Finished Tecalemit Class VII MOT Bay
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Overcoming a sloping floor to install an MOT bay at SD Autocare, Wetherby

6 September 2021
Established in the late 1990’s, SD Autotech of Wetherby has developed an enviable position within the TVR enthusiast ...
Read Case Study : ' . get_the_title( get_the_ID() ) . '

At Your Leisure – Mobile Columns & Small Wheel Adaptors at Highland Camp...

21 May 2021
Highland Campervans, located just north of Inverness, have been dealing with leisure vehicles for many years. Like ma...
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Creating a Dedicated Wheel Alignment and Tyre Service Bay – Case Study:...

11 May 2021
Wheel Alignment can be a valuable and profitable revenue stream for a workshop operation. Tecalemit Garage Equipment ...
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Skim Your Discs – Not Your Profits

30 March 2021
Sutherland M Power Cars in Winford, Bristol installed the Pro-Cut on-car brake lathe in their workshop.   a few month...
Hi-Perfrormance Cars, Expensive Discs
Read Case Study : ' . get_the_title( get_the_ID() ) . '

Tecalemit’s expertise gets J&S Autocare from bare shell to fully o...

20 November 2020
It was June 2020 and the UK was emerging from the first Coronavirus lockdown. Here at Tecalemit Garage Equipment, the...
Read Case Study : ' . get_the_title( get_the_ID() ) . '
Tecalemit Garage Equipment