6.0T 6.0M Quadra Service & MOT Lift (Class VII & IV)

Product Number: SF-8976-SERIES

Product Description

The SF/8976/SERIES has an increased platform length making it ideal for general servicing and repair work on even the longest wheelbase LGV vehicles and motor caravans. The electro-hydraulic operation ensures low maintenance, low running costs, high durability and outstanding performance. The Quadra 6t 4 post lift is an electro-hydraulically operated platform lift. Designed specifically to provide an intermediate capacity lift and suitable in particular where workshop space is at a premium. With a platform length of 6000mm the lift is suitable both for larger light goods vehicles such as extended wheelbase ‘sprinter’ type vehicle and also for smaller bodied rigid trucks and tractor units.

The platforms are a generous 650mm in width, providing ample space for twin wheeled vehicles with one adjustable platform. The distance between platforms ranges from 900 -1200mm. This ensures easy accommodation of a large range of vehicles, including saloon cars if required.

The 6t Quadra lift incorporates a comprehensive range of mechanical, electrical and hydraulic safety features and conforms to CE requirements.

The SF/8976/SERIES can be supplied in surface mounted or recessed configurations.  Rear slip plates cab be specified, making the lift ideal for vehicle geometry and wheel alignment.

  • 3Ph, Surface Mounted (SF/8976)
  • 3Ph, Recessed (SF/8976/REC)
  • 3Ph, Recessed Mounted With Play Detectors (SF/8976/ATL)
  • 3ph, Surface Mounted With Rear Slip Plates (SF/8976/4)
  • 3ph, Recessed With Rear Slip Plates (SF/8976/4/REC)

Product Options

  • 4 tube lighting kit (neutral) (OA/60113)
  • MOT turning radius plates (OA/60348)
  • Drive through kit for surface mounted lifts (OA/60579)
  • Drive through kit for recessed installations (OA/60580)
  • 4.0t manual jacking beam (SS/8834)
  • 4.0t air operated jacking beam (SS/8834/P)

Installation Requirements

Installation must be onto a level workshop floor and onto a concrete base of 160mm thickness grade C30. A 3ph 400V power supply is required via a 20 amp fused isolator, which should be located adjacent to the lift motor post.

SKU: SF-8976-SERIES Categories: ,

Register with us today to gain full access

Request Datasheets

Latest Tecalemit Case Studies