SF/9944/4 4.0t 4.0m Quadra Wheel Alignment Lift

Product Description

The SF/9944/SERIES is Tecalemit’s entry level wheel vehicle geometry lift designed for use where space is at a premium. A compact precision 4 post lift developed for use with CCD and laser wheel alignment systems. The SF/9944/SERIES has a platform length of just 4080mm. The lift is supplied with 50mm platform recesses for radius turning plates and ball bearing mounted rear wheel slip plates which allow for geometry adjustments to be made without the need for resetting the vehicle.

The Quadra /SERIES has both hydraulic and electronically operated mechanical safety systems.  The SF/9944/SERIES can be equipped with an integral lifting table to enable all four wheel to simultaneously lifted off the platforms.  This makes the SF/9944/SERIES ideal for 4-wheel alignment operations.

• Quadra 4.0t Compact Geometry lift 3ph (SF/9944/4)
• Quadra 4.0t Compact Geometry lift 1ph (SF/9944/4/1)
• Quadra 4.0t Compact Geometry lift with lifting tables 3ph (SF/9944/6)
• Quadra 4.0t Compact Geometry lift with lifting tables 1ph (SF/9944/6/1)

Product Options

SF/9444/4

• 2.0t manually operated hydraulic jacking beam (SS/8821)
• 2.0t air operated jacking beam (SS/8821/P)
• Radius turning plates (OA/60292)
• 4 tube lighting kit (neutral supply) (OA/60342)
• Infill plate kit (500mm) (OA/60295)

SF/9444/6

• 2.0t manually operated hydraulic jacking beam (SS/8829)
• 2.0t pneumatic jacking beam (SS/8829/P)
• 3.0t manually operated hydraulic jacking beam (SS/8839)
• 3.0t pneumatic jacking beam (SS/8839/P)
• Radius turning plates (OA/60292)
• 4 tube lighting kit (OA/60342)
• 20mm pads (set of 4) (OA/60603/20)
• 40mm pads (set of 4) (OA/60603/40)
• 80mm pads (set of 4) (OA/60603/80)

Installation Requirements

Correct installation of the lift is essential and a level floor of at least 160mm C30 grade concrete is a prerequisite. Power supply is via a 15amp fused isolator.