5T 5.2M Service & MOT (Class VII & IV) Recessed Lift

Product Number: SF-9065-EV-SERIES

Product Description

The SF/9065/EV/SERIES range of long platform scissor lifts provides the complete solution for workshops servicing a broad range of cars and light goods vehicles. The vehicle lift is the largest revenue earner in the workshop and scissor lifts provide a super efficient space saving solution.

The SF/9065/EV can accommodate most cars and light goods vehicles up to a gross vehicle weight of 5000kg, creating a highly productive work bay. SF/9065/EV has a complete range of platform options which allow vehicle geometry work to be carried out in accordance with virtually all manufacturers procedures.

In addition to the standard ‘flat’ platform Tecalemit offers 3 design options. Operators can choose a platform fitted with recesses for radius turning plates and rear slip plates enabling vehicle geometry checks and adjustments, or platforms fitted with an integral wheel free lifting system. The third platform variant is a combination of both integral lifting and slip plates.

  • 5.0t Scissor Lift 3ph (SF/9065/EV)
  • 5.0t Scissor Lift 3ph with rear side slip plates for wheel alignment (SF/9065/4/EV)
  • 5.0t Scissor Lift 3ph with auxiliary lifting system (SF/9065/5/EV)
  • 5.0t Scissor Lift 3ph with auxiliary lifts and rear side slip plates (SF/9065/6/EV)


The following upgrades are available for the SF/9065/EV/SERIES

  • 3.0t Hydraulic Jacking Beam (SS/8839)
  • 4-Tube Lighting Kit – When Supplied With Lift (OA/60588)
  • Radius Turning Plates (OA/60292)
  • Infill Plate Kit For Radius Plate Recess (OA/62327)

The SF/9065/EV/SERIES is designed primarily for installation into a floor recess, this should be prepared to Tecalemit specification. The lift requires a 3ph power supply via a 20 amp fused isolator. An air supply of 6-8 Bar is also required to operate the latching systems.

SKU: SF-9065-EV-SERIES Categories: ,

Register with us today to gain full access

Request Datasheets

Latest Tecalemit Case Studies