Tecalemit Garage Equipment Ltd

Car Brake Tester - For UK MOT Testing of Class III & IV Vehicles DE 9415 & DE 9425

Key Features

• Large clear LED display
• Infra-red remote control
• Galvinised roller bed and roller bed covers
• Approved for Class III & IV UK MOT testing
• Fully conforms to CE specifications
• Roller bed axle load capacity 3000kg (DE 9415)
• Roller bed axle load capacity 2500kg (DE 9425 & 9426)
• Capable of testing 3 wheeled vehicles
• Capable of testing 4WD vehicles, subject to manufacturers specifications
• Simple fast testing with 1 man operation
• Option of single or split roller bed installation
• Single phase option where standard 3Ph power supply is not available
• Flush fitting roller beds for improved workshop safety
• Long life epoxy corundum roller coating
• Third roller safety feature ensures no roller start up until the vehicle wheels are in place on the rollers
• Dual start of roller sets ensure rollers run together for alignment and imbalance tests
• Automatic wheel slip sensors detect full wheel lock
• Low ratio gearing for ease of vehicle exit from the brake tester
• UK Automated Test Lane specification option includes 4 point electronic axle weighing system on DE 9415 ATL
• UK Automated Test lane specification option includes 8 point electronic axle weighing system on DE 9425 ATL and DE 9426 ATL models
• UK Automated Test Lane specification option includes brake test result storage facility & operator workstation cabinet

Installation and Application

The DE 9400 brake testers from Tecalemit are high performance electronic roller brake testers which can be supplied in 3 different roller bed formats and in either Manual (standard UK MOT) specification or Automated (UK MOT ATL) specification.

DE 9400 has a large clear LED display which can be clearly seen over the length of the test lane, making single man operation, via infra-red control, quick and easy. When installed with the axle weighing system in automated test lanes (ATL) to a steel pit frame is supplied to ensure a precision fit of the roller bed in the workshop floor, this is essential to ensure the roller bed and weighing system perform with complete accuracy. The pit frame is cast into the floor recess and has to be installed when the workshop floor is being prepared. When requested, Tecalemit will supply the frame in advance of the brake tester at no addtional cost to the client.

The split roller bed models (de 9425 & 9426) have been designed for installation into existing floor recesses used with old discontinued brake testers, such as Kismet and some Crypton models. Please ask your Tecalemit Technical representative to check such recesses and advise on any remedial work required to complete the installation.

The DE 9426 is a 1Ph brake tester and should only be used where a 3Ph electrical supply is not available.

Part numbers and ordering information

Options and accessories